Example. Home Screen While Live
The home screen gives you an overview of everything going on with your device. Tap any of the sections for more in-depth information.
This block shows what Video Input Type (ex. SDI) is currently selected for streaming along with the Resolution and Frame Rate (ex. 1080p60) of the video provided by that signal.
This block shows what type of network connection you are using Ethernet or Wi-Fi. If you are using Ethernet, the subtext will show if you are connected to the internet. If you are using Wi-Fi, it will list the name (SSID) of the network you are currently connected to.
This block shows the current audio levels.
This block will display information about your upcoming or live broadcast. In order for information to be displayed here, you must be connected to the Internet and successfully connected to BoxCast. This block will split into Broadcast Information
and Broadcast Preview
depending on the timing of the scheduled broadcast. The Broadcast Information will display one of the following states:
- No Scheduled Broadcast - Schedule a broadcast on the BoxCast Dashboard or Broadcaster App.
- Starting in [time] - A countdown timer to the next scheduled broadcast
- Preparing broadcast - The BoxCaster Pro is starting the process of automatic setup for your broadcast.
- Testing network - The BoxCaster Pro is testing your network. It will use these results to set the optimal streaming configuration.
- Configuring broadcast - The BoxCaster Pro is configuring the optimal settings for your live stream based on network conditions and desired quality.
- Going live in [time] - Your broadcast has been automatically configured. The countdown to Live begins! At this time you can also now see the Broadcast Preview
- LIVE, Ending in [time] - You are live! The red “Live" indicator is shown. The countdown timer shows how much time is remaining in your scheduled broadcast.
Once a broadcast has ended, it will immediately show information about the next scheduled broadcast or if no broadcast is scheduled, it will return to “No Scheduled Broadcast.”
The preview broadcast button will appear during the “Pre-Roll” period of any broadcast approximately 10 minutes before a scheduled broadcast or whenever the automatic broadcast configuration is complete. It will then be available for the duration of the broadcast.
Along with the LED light ring, the home screen will display alerts. A block will turn orange to indicate an alert. Alerts occur in the following situations:
No video input before a broadcast
This alert will show anywhere up to 10 minutes before a broadcast start time while the broadcast is being configured. Connect a video input to resolve it.
Loss of video input during a live broadcast
Connect the same type of video input to resolve the issue. You cannot change the type of input once the broadcast is configured (ex. switching from HDMI to SDI). You must end the broadcast and restart a new one if you need to change input types.
Loss of network connection during a live broadcast
Connect to an Ethernet or Wi-Fi network to resolve the issue and go live.
The video screen will indicate what video inputs are detected and their respective resolutions and frame rates.
The teal will indicate the video input that is currently being used for streaming. You cannot select which video input to use from this screen. If both inputs are connected, the BoxCaster Pro will default to SDI. If you would like to use HDMI instead, please disconnect the SDI input.
The network screen will show what networks the BoxCaster Pro is currently connected to.
Once connected, it will display the network information including the LAN IP, MAC Address, and SSID (Wireless). The type of network connection currently being used will be indicated with teal.
The audio screen will display the Audio Levels for all detected audio sources. The currently active sources will be indicated with teal.
Note: Unless specifically selected in the dashboard, the Analog source will indicate that it is active even if no cables are connected. This is due to the nature of the analog connections.
You may also use this screen to control the headphone level by tapping the headphone icon in the top right corner. Learn more about headphone monitoring control here
More than 10 Minutes Before Broadcast
The next scheduled upcoming broadcast
Countdown timer or status during broadcast preparation
Duration and Broadcast Type
Live or 10 Minutes before Broadcast Start Time
- Status and Countdown Timer
- Broadcast Name
- Active Viewer Count
- Video Source
- Audio Source
- Frame Frate
- Bitrate - This will show the current bitrate. It is dynamically controlled by the BoxCaster
Broadcast Preview Screen
This screen is only available during a live broadcast or during the pre-roll state which happens up to 10 minutes before a live broadcast. It will show a live preview of the video that is being streamed. Note: Graphic overlays will not be displayed on the screen as they are applied after the video has been streamed to the cloud.
Tap the (i) info button in the top right corner to show additional details about the broadcast as shown in this screenshot.
This screen also displays:
- Broadcast Name
- Active Viewer Count
- Current Time / Broadcast Duration
- Audio Levels
Tap the center of the video to enter into a “Full Screen” mode. Tap the screen again to bring the information back.
Device Info Screen
Press and hold on the Home screen for 2 seconds to bring up the Device Info page. Here you will find logistical information such as name and account relevant to your BoxCaster.