Adjusting individual broadcast settings.

Advanced Configuration is accessed from the individual video page.  You will click Edit Event Details - Advanced to pull up the editable details of your event. All changes may take up to a minute to propagate and are only changed for that specific event.

 

Target Video Bitrate: Your BoxCaster will query the network for an acceptable bitrate to stream at (Default setting) but you can hardcode a video bitrate for your video here. In general we do NOT recommend hardcoding video bitrates.

Target Audio Bitrate: Your BoxCaster will query the network for an acceptable bitrate to stream audio at, as well. The higher the bitrate the better your audio quality will be.

Audio Source: The Boxcaster can ingest audio in two ways (embedded HDMI or Analog via R/W RCA). If you are using an audio mixer you can set an event to pull audio from the Analog ports ONLY using this option.

Video Resolution: Your BoxCaster will query the video device to establish a reliable resolution for the video. Resolutions can be selected prior to a broadcast but not during. It is NOT recommended to hardcode a resolution.

DSCP Value: If your network admin would like to assign a DSCP value to the video stream they can do so here. If you do not know what DSCP is then do NOT select any options here.

To make changes to your Account Settings click HERE.

 

 

Have more questions? Submit a request

0 Comments

Article is closed for comments.
Powered by Zendesk